Based on the proven GY 601 SMM Pro gyro, the GY 611 incorporates a further improvement in sensor sensitivity compared to its predecessor. A modified sensor element is now used in conjunction with an aluminium sensor housing - the net result is improved vibration absorption and higher sensor sensitivity.
The stabilising effect of the gyro has been further improved. The drift-free SMM sensor, in conjunction with the ultra-fast S 9251 servo, produces a tail rotor control system of incredibly high performance. The model´s tail rotor appears to be nailed to the sky, even in a strong wind. An ultra-fast digital signal processor controls the tail rotor servo with a pulse frequency of 330 Hz, and is able to correct deviations in the tail boom position before they visibly affect the model.
The GY 611 offers two basic settings:
1. Smooth - for FAI flying
2. Spectacular 3-D flying with pirouette speeds of more than 550° per second.
Additional features of the SMM gyro
- AVCS sensitivity function = variable tail rotor control characteristics (feeling and stopping)
- Tail rotor servo delay variable separately in both directions: there and back.
- In AVCS mode the neutral setting of the tail rotor can be called up, enabling the pilot to set straight lift-off.
- To protect the gyro from electro-static discharge the case is made of an anti-static material with a shielding effect.
- Combination display shows set gyro gain value and battery voltage.
Note:
The GY-611 SMM gyro requires a servo with a neutral pulse width of 760 �s, such as the S 9251 - for this reason it cannot be used with any other servo.
Specification:
Dimensions: 40x20x36.6 mm
Mass/weight: 57.00 pond/g
Operating voltage: 3.8-6 Volts
Nominal voltage: 4.80 Volts
Torque: 37.00 Ncm
Transit speed: 0.05 Sec/45°
|
show all New Products
